Twisted-pair :, 10/20Mbps for half/full duplex, 100/200Mbps for half/full duplex, 1000/2000Mbps for full duplex; Fiber Optic :, 200Mbps / 2000Mbps for full duplex
Back pressure for half duplex mode, IEEE 802.3x pause frame for full duplex mode
Launch Power
IGTP-802T: Max. -4dBm, Min. -9.5dBm; IGTP-802TS: Max. -3dBm, Min. -9.5dBm; IGTP-805AT: Varying on SFP Module
PartNumber
IGTP-802TS
Protocols and Standards Compliance
IEEE 802.3 Ethernet , IEEE 802.3u Fast Ethernet , IEEE 802.3ab Gigabit Ethernet, IEEE 802.3z Gigabit Ethernet over Fiber Optic, IEEE 802.3x Flow Control , IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus
Maximum Frame Size
9K
ESD Protection
6KV DC
Regulatory Compliance
FCC Part 15 Class A, CE
ProductNameImported
IP30 Industrial 10/100/1000BASE-T to 100/1000BASE-LX Converter with 802.3at PoE+ (Single mode, 10km, -40 to 75C, 12V~48V DC power boost)
Fiber Cable
IGTP-802T: Multi-mode: 50/125?m or 62.5/125?m optic fiber; IGTP-802TS: Single-mode: 9/125?m optic fiber; IGTP-805AT: Varying on SFP Module
Physical Port 1-port 10/100/1000BASE-T RJ45 with IEEE 802.3af /802.3at PoE+ Injector 1 1000BASE-SX/LX SC Fiber interface (IGTP-802T/IGTP-802TS) 1 SFP slot, supporting 1000BASE-X and 100BASE-FX transceiver dual mode (IGTP-805AT) Power over Ethernet Complies with IEEE 802.3at/af PoE Plus end-span PSE 1 IEEE 802.3at/af device powered Supports PoE Power up to 30.8 watts for PoE port Provides DC 52V power over RJ45 Ethernet cable to PD with Ethernet port Auto-detects IEEE 802.3at/af equipment and protects devices from being damaged by incorrect installation Remote power feeding up to 100m IEEE 802.3at/af splitter devices compatible Layer 2 Features Supports auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full duplex mode on RJ45 port Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) Hardware LED Indicators - System: Power 1, Power 2 and Fault LED - Fiber port: LNK/ACT - 10/100/1000Base-T port: LNK/ACT, 1000, PoE-in-use DIP switch: LFP (Link Fault Passthrough) mode selection Industrial Case and Installation IP30 metal case DIN-rail or wall-mount design 12 ~ 48V DC/24V AC redundant power with polarity reverse protect function and connective removable terminal block for master and slave power Supports 6000 VDC Ethernet ESD protection -40 to 75 degrees C operating temperature
LED
System: Power 1, Power 2 and Fault LED ( Green ), Fiber 1000BASE-X: LNK/ACT ( Green ), TP 10/100/1000BASE-T: LNK/ACT, 1000 ( Green ), PoE: Power-in-use ( Orange )
Link Fault Passthrough DIP Switch
ON/OFF
Producer
PLANET
Receive Sensitivity
IGTP-802T: -13.5dBm, IGTP-802TS: -14.4dBm, IGTP-805AT: Varying on SFP Module